How to Sewing With Velvet
The first thing to note is that using velvet can be tricky because of its slippery nature and easy to mark the facts, however, a well-executed project in velvet is simply amazing if you use the right tool. Pointing out the incredible obvious if you choose a way you have confidence - maybe you used before or before using very simple lines that can also help you.
Use a fine needle to assemble the pattern piece to the wrong side of the fabric and mark any dart with the tailor's mark. If velvet is made of natural fibers, use cotton thread or thread, because the polyester thread will be stronger than the fabric and may be cut.
The use of walking foot on the sewing machine maximizes the control of slippery fabrics such as velvet, chiffon and silk or elastic cloth as it ensures that the two layers of fabric feed the machine at the same speed, so keep the lining properly. A built-in footsteps. If you use footsteps, it can also eliminate the need for embroidery stitches to save your time.If you have no footsteps, another option is to place the tissue in between the two layers of fabric and between the fabric and the feed Dog, once the joints connected to simply tear it.
As mentioned above, select the velvet rayon made from man-made fibers, and the velvet cotton thread or silk made of natural fibers, and choose our stretch velvet stretch. Always in the direction of the pile sewing, and then in the clothing for some fabric testing. If the fabric is wrinkled, try lifting the tension on the machine. If you use velvet fabric without stretching, the fabric will tighten tightly.
You can not press velvet according to other fabrics in the usual way, rather than placing it down on the towel and hanging the iron on it so that the steam can function. If you are steaming a curved suture place, your tailor ham under the towel and then in the normal way and steam the fabric will face down on the ham. Towel to prevent pile deformation.
If you want to make velvet clothing even more spectacular, you can also include some machine embroidery. Use a regular tear stabilizer under the fabric and use a transparent, soluble stabilizer on the right side of the fabric to prevent the embroidery stitch from sinking into the pile.
The article from http://www.jingsentextile.com