Our News
The Process of Making Printing Fabric
This article is to give a brief introduction of how to making printing fabric. To get the best results while fabric printing, stabilize the material before printing on it, set photograph and printer settings to the highest resolution, and treat the fabric with a color fast setting agent. Adhering fabric to a sturdy backing prevents it from bunching and tearing while traveling through the printer mechanisms. Using high definition image settings for photos and printers creates a clean, crisp image that is easy to see once incorporated into the larger sewing project. Chemical setting agents preserve the project and protect it against the damage caused by aging, use, and washing.
When fabric printing at home, ensure that the material being printed on is stabilized before placing it in the printer tray. Any type of ink jet printer may be used to transfer images and words to fabric. Any type of freezer paper, which may be purchased at a local grocery store, is a common choice for use as a stabilizing agent. The paper can be ironed to the wrong side of the fabric, and both should be trimmed simultaneously to the correct size of paper normally handled by the printer.
A setting agent can be used before and after fabric printing to maintain the crisp appearance and original colors of the transferred images. The fabric is first allowed to soak for a half hour or more in a chemical setting solution. This compound prepares the fabric for its interaction with the printer, and prevents colors from smudging or running. After the photo has been applied to the material it may be rinsed in a second solution that permanently bonds the fabric and ink. Treating the fabric in this manner will help the printed ink survive many years of use and cycles through washing and drying machines.More:http://www.jingsentextile.com